Conventional APFC Relay

APFC Relay, Power Factor Controller is designed for Automatic / Manual control of external Capacitor Banks in 3 Phase 4 Wire or 3 Phase 3 Wire & Single Phase LT distribution systems to allow the power factor of the installation to be stabilized to the desired value. The controller employs the state of the art micro-controller design for measurement & visualization of various system parameters.

APPLICATION:

In all in-comers of an Electrical Plant

• Fixed power factor correction for individual load (e.g: Motor, Transformer etc.)
• Hi-tech Software Parks, Buildings and Shopping Malls

FEATURES:

• Effective PF Control. Up to 12* capacitor banks controllable
• Seven segment display for user interface
• Auto / Manual Operation
• Wide range of measuring voltage Input
• Measurement & Display of line parameters like V, I, P, Q, S, Cos Ø
• Indication of active Capacitor Bank through LEDs
• Wide range of Programmable parameter including CT ratio, Target
• Cos Ø value, C/K Ratio, Capacitor Bank switching program, control algorithm etc.
• Suitable for various wiring scheme
• Protection & Indication on abnormal condition such as Over /
• Under Compensation, Over Voltage, Over/Under Current etc.
• Optional FAN control output based on temperature sensing
• Field accessible test mode for relay contact check
• Automatic C/K set-up mode
• Potential Free Alarm contact on abnormal conditions
• APFC Relay

BENEFITS:

• Fully automatic compensation
• Saving in installation cost of conductors
• Reduced electric utility Bills & Increased System Capacity
• Reduction of Power Losses

What Everyone Must Know About Automatic Power factor correction panel manufacturer

We are offering Automatic Power Factor Correction Panels manufacturer and supplier to our more. To maintain power factor to unity which means to achieve demand in KVA on lower side Power factor is maintained to set value using APFC relay in auto mode where as In case of failure of APFC relay push buttons are used.

We are offering Automatic Power Factor Correction Panels manufacturer and supplier to our clients. Most of the commercial and Industrial installations in the country have large electrical loads which are severely inductive in nature, such as motors, large machines, air conditioners, drivers etc.

Automatic Power factor correction panel

Automatic Power factor correction panel 

Advantages of Power factor improvement and Correction:

Following are the merits and benefits of improved Power; 

•  Increase in efficiency of system and devices
•  Low Voltage Drop
• Reduction in size of a conductor and cable which reduces cost of the Cooper
• An Increase in available power
• Line Losses (Copper Losses) I2R is reduced
• Appropriate Size of Electrical Machines (Transformer, Generators etc)
• Eliminate the penalty of low power factor from the Electric Supply Company
• Low kWh (Kilo Watt per hour)
• Saving in the power bill
• Better usage of power system, lines and generators etc
• Saving in energy as well as rating and the cost of the electrical devices and equipment is reduced  

Features of Automatic Power factor correction panel:

• Modular design, Non-compartmentalized
• Colour RAL 7035
• Indoor, Floor mounted, cable entry from bottom.
• Minimum joints hence better reliability and lower losses.
• Special cables used hence withstands high temperature
• Incomer MCCB, 3 pole ,35KA
• Step protection MCCB
• Step switching
• Capacitor duty contactors with Damping Resistors.
• Microprocessor controlled relay
• Switching option - Auto only
• Busbar – Aluminium
• Protection class IP42
• Capacitors  - Varplus Heavy Duty Can type Compatible  EC 61921 Wide Range

Applications

•  Fluctuating loads such as
• Steel Rolling mills
• Chemical industry
• Cement plant
• Suger plant
• Textile
• Hospitals / Hotels
• Building segment
• Automobile industry etc